Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS Mark 70 (ABS/ASR)
Control Module and Hydraulic Unit
Special tools, testers and auxiliary items required
‹› Torque wrench 5-50 Nm (VAG 1331)
‹› Torque wrench (VAG 1410)
‹› Brake pedal actuator (VAG 1869/2)
Sealing Plug Repair Kit (1H0 698 311 A)
1
Transport protection for valve domes (foam)
2
M10 sealing plugs
3
M12 sealing plugs
After separating the control module from the hydraulic unit, always install the transport protection - 1 - to the hydraulic unit valve domes.
Warranties will not be granted for hydraulic units without the transport protection.
Removing
Component location:
The control module is bolted to the hydraulic unit and is located on the right side in the engine compartment.
CAUTION!
Do not bend the brake lines near the hydraulic unit.
-
Read and note the present control module coding.
-
Disconnect the battery..
-
Remove the engine cover.