Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
-
Seal the brake lines and threaded holes immediately using sealing plugs from sealing plug repair kit (1H0 698 311 A).
-
Mark the brake lines - 1 through 4 - for the brake calipers and remove and seal them.
-
Pull the hydraulic unit with control module upward in - direction of arrow -.
Removing the Control Module from Hydraulic Unit
‹› Separation of the control module and hydraulic unit is not possible on vehicles with a hydraulic brake booster or hill assist.
-
Set the hydraulic unit with control module downward on to a clean, level surface.
-
Remove the E5 Torx bolts - arrows - for the hydraulic pump.