Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Muffler: Service and Repair
Middle and Rear Mufflers, Separating and Connecting
‹› A separating point has been provided in the connecting pipe for removing, installing and individual replacement of the center or rear muffler.
‹› The separating point is marked by depressions around the circumference of the exhaust pipe.
Special tools, testers and auxiliary items required
‹› Body repair saw (VAG 1523A) or
‹› Chain pipe cutter (VAS 6254)
‹› Torque wrench 5-50 Nm (VAG 1331)
‹› Protective eyewear
‹› Protective clothing
Separating
CAUTION!
To prevent injuries from metal shavings, wear protective goggles and protective clothing.
-
Cut the exhaust pipe at the separation point - arrow -, for example, using a (VAG 1523A) or a (VAS 6254) at a right angle.
Connecting
-
Position the clamping sleeve at the side markings when installing.
-
When installing the clamping sleeve, ensure that the bolt end - arrow - does not project beyond the lower edge of clamping sleeve: