Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
-
Remove securing latch - 3 - from harness connector.
-
Disengage lock - arrow B - on electrical connection - 2 - and disconnect from Steering Column Electronic Systems Control Module (J527).
Installing
Install in reverse order of removal, noting the following:
Make sure the pins are not bent and that the connector audibly engages.
Airbag Spiral Spring/Return Spring With Slip Ring
CAUTION!
When removing, the Airbag Spiral Spring/Return Spring With Slip Ring (F138) must not be twisted out of the center position and the
wheels must be "straight ahead".
Removing
-
Lift both retainers - arrows - on the airbag spiral spring/return spring with slip ring (F138) - 1 - slightly and pull the spring back from steering
column or steering column switch.
Installing
Install in reverse order of removal, noting the following:
When installing the airbag spiral spring/return spring with slip ring (F138), it must be in the center position and the wheels must be straight ahead.
The airbag spiral spring/return spring with slip ring (F138) center position, which depends on the manufacturer, is depicted as follows: