Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Windshield Wiper Switch
Removing
‹› For reasons of clarity, steering column switches are depicted as removed in the illustration.
-
Release retaining clips - arrows - using a 1.0 mm feeler gauge - 1 - and remove Windshield Wiper Switch (E) toward rear.
Installing
Install in reverse order of removal, noting the following:
Windshield Wiper Switch (E) must engage audibly.
Steering Column Switch Base Plate
‹› For the removal of base carrier for steering column switches - 2 -, shear bolts of steering lock housing must be drilled out. New shear bolts - 1 -
are required for the subsequent installation.