Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Fluid - M/T: Service and Repair
Transmission Oil, Checking
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Triple square socket driver (3357)
-
Remove sound insulation
-
Remove fill plug for checking transmission oil - arrow -.
Oil level is correct when transmission is filled up to lower edge of oil fill hole.
-
Screw in plug - arrow - with new sealing ring.
-
Tighten plug - arrow - to tightening specification --> [ 5 Oil filler plug ] See: Transmission and Drivetrain/Manual
Transmission/Transaxle/Service and Repair/Overhaul/Transmission Housing, Servicing.
When Filling with New Oil, Note the Following
-
Remove plug - arrow -.
-
Top off transmission fluid to lower edge of oil fill hole.
-
Install plug- arrow -.
-
Start engine, select gear and let transmission turn approximately 2 minutes.
-
Shut off engine and remove plug - arrow -.
-
Top off transmission oil again to lower edge of oil fill hole.
-
Install plug - arrow - with new sealing ring.
-
Tighten plug - arrow - to tightening specification --> [ 5 Oil filler plug ] See: Transmission and Drivetrain/Manual
Transmission/Transaxle/Service and Repair/Overhaul/Transmission Housing, Servicing.
-
Install sound insulation