Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
-
Remove the shear bolts using pliers on the bolt head.
The procedure for the second shear bolt is exactly the same.
If the bolts cannot be removed:
-
Cut into the heads of the shear bolts so that two parallel surfaces are formed - arrows - and remove the bolts.
-
Insert a screwdriver - A - between the protective housing and retaining plate - arrow -.
-
Pry the protective housing upward using the screwdriver - A - and pull it off sideways from retaining plate - arrow -.