Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
-
Unlock the connector from the fuel pressure sensor - 1 - using the (T10118) and then disconnect the connector.
-
Remove the fuel pressure sensor using the (VAS 5301/7).
-
Collect leaking fuel with a cloth.
Installing
‹› Tightening specifications, refer to --> [ Fuel Rail Assembly Overview ] See: Fuel Delivery and Air Induction/Fuel Rail/Service and Repair/Fuel
Rail Assembly Overview.
Install in reverse order of removal. When doing this note the following:
‹› Lubricate the fuel pressure sensor sealing point with clean engine oil and install it in the fuel rail.