Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Headlamp Alignment Control Module: Service and Repair
Headlamp Range Control Module
Special tools, testers and auxiliary items required
‹› Trim removal wedge (VAS 3409)
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool
(trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.
Removing
-
Remove side cover - 1 - of instrument panel, do this by inserting (VAS 3409) or a screwdriver into recess - 2 - and pry off cover - 1 - in -
direction of arrow -.
-
Disengage securing bracket - 1 - in - direction of arrow - and disconnect harness connector - 2 - from Headlamp Range Control Module (J431).