Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Seat Belt Latch: Service and Repair
Front Seat Belt Latch
Seat Belts
Front Seat Belt Latch
‹› Removing and installing the left seat belt latch is described. The same instructions apply for removal and installation for seat belt latch of right
seat.
Removing
-
Remove front seat. Refer to => [ Front Seat ] See: Body and Frame/Seats/Service and Repair/Front Seats/Front Seat.
-
Position seat into rearmost seat position.
-
Disconnect wiring harness to seat frame seat belt latch.
-
Remove cover cap from seat rails.
-
Remove bolt - 1 - (20 Nm).
‹› Bolt is micro-encapsulated and must be replaced after each loosening.
‹› Before installing the new bolt, threads on nut must be cleaned, re-cut if necessary.
-
Pull seat belt latch - 2 - out of mount in seat rail - arrow -.
Installing