Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
-
Remove wire retainer - 2 -.
-
Remove the starter mounting bolt - arrow -.
-
Remove the starter.
Installing
Install in reverse order of removal, noting the following:
-
Tighten all fasteners to specified values. Refer to --> [ Starter Tightening Specifications ] See: Specifications.
Starter, 2.0L TDI and Manual Transmission
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
‹› Spring-type clip pliers (VAS 5024)
CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair information. Refer to --> [
Battery, Disconnecting and Connecting ] .
Removing
-
Disconnect the battery. Refer to --> [ Battery, Disconnecting and Connecting ] .