Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Dimension - a - = 2 to 3 mm.
-
Align the (T10214/2) with the pressed in bushings onto the subframe. While doing this, the corners of the inner core must equal an imaginary line
lying parallel to the edge of the (T10244).
Distance - a - must be identical at the right and left so that parallelism is guaranteed.
-
Subframe makes contact on smaller inner diameter of the (T10244/3).
-
Press in bearing until seated and until a pressing force of 20 kN has been obtained.