Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Ride Height Sensor: Service and Repair
Front Suspension
Front Left Level Control System Sensor
Front Left Level Control System Sensor
Special tools, testers and auxiliary items required
‹› Torque wrench (VAG 1410)
Removing
‹› In order to be able to remove the front level control system sensor (G78) the steering wheel must be turned all the way to the right; this assures that
there is enough clearance between the control arm and the stabilizer bar.
-
Disconnect the electrical connector.
-
Remove the bolt and the nut.
-
Remove level control system sensor.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
‹› The level control system sensor lever must point toward the vehicle exterior.
‹› The threads on the vehicle level sensor must be installed into the front hole in the control arm. The tab on the vehicle level sensor retainer must
lock into the rear hole in order to assure a correct installation position.
-
Perform a basic setting of the headlamps. Refer to --> Vehicle Diagnosis, Testing, and Information System VAS 5051 in "Guided Fault Finding"
function.
Tightening Specifications
Front Level Control System Sensor Assembly Overview
Front Level Control System Sensor Assembly Overview