Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Tire Pressure Sensor: Service and Repair
Tire Pressure Sensor
Tire Pressure Sensor
Removing
-
Remove the union nut - 1 -.
-
Remove the tire pressure sensor - 2 - from the wheel.
Installing
CAUTION!
Clean the valve opening before installing the tire pressure sensor.
-
Insert the tire pressure sensor - 2 - with a new seal and sealing washer and press on it in the spots marked by the - arrows - onto the wheel.
Install the union nut - 1 - from the outside onto the tire pressure sensor.
-
Press the tire pressure sensor - 1 - on the spots marked with the - arrows - onto the wheel and tighten the nut to 8 Nm.