Jetta SportWagen L5-2.5L (CBUA) (2009)
Front Door Hinge: Service Precautions
Door Hinges Assembly Overview
CAUTION: The nut for eccentric pin - 9 - must not be loosened under any circumstances. It cannot be secured again using workshop
equipment.
NOTE:
-
The description applies to the right side. The left side is derived accordingly from this.
-
Bolts for door hinges must always be replaced after loosening.
-
Hinges are no longer manufactured as separated parts.
1
-
Door
2
-
Guide bolt
-
10 Nm
3
-
Door hinge with door arrester
4
-
Socket head bolt
-
20 Nm + 1 / 4 additional turn (90 degrees)
-
Always replace bolt after loosening
5
-
Socket head bolt
-
Installed from vehicle interior
-
Remove lower A-pillar trim:
-
20 Nm + 1 / 4 additional turn (90 degrees)
-
Always replace bolt after loosening
6
-
Socket head bolt
-
20 Nm + 1 / 4 additional turn (90 degrees)
-
Always replace bolt after loosening
7
-
Socket head bolt
-
20 Nm + 1 / 4 additional turn (90 degrees)