Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Press the rubber grommet - 4 - out of the side panel and remove the wiring harness - 3 -.
-
Remove the Fuel Tank Lid Unlock Motor (V155) - 1 - in - direction of arrow -
Installing
-
Guide the wiring harness - 3 - through the opening in the side panel.
-
Secure the rubber grommet - 4 - on the side panel.
-
Connect the connector - 2 -.
-
Slide the Fuel Tank Lid Unlock Motor (V155) - 1 - opposite the - direction of arrow - onto the side panel.
-
Install the fuel tank lid unit. Refer to --> [ Fuel Tank Door Unit ].
-
Install the side trim panel.