Jetta SportWagen L5-2.5L (CBUA) (2009)
Rear Cross-Member: Service and Repair
Tie Rod
Tie Rod
Special tools, testers and auxiliary items required
‹› Torque wrench 5-50 Nm (VAG 1331)
‹› Torque wrench 40-200 Nm (VAG 1332)
Removing
-
Remove the wheel.
-
Remove the coil spring. Refer to --> [ Coil Spring ] See: Steering and Suspension/Suspension/Suspension Spring ( Coil / Leaf )/Service and
Repair/Coil Spring.
-
Remove the nut - 1 - and remove the coupling rod - 2 - from the stabilizer bar.
-
Remove bolt - arrow - for the tie rod - 3 -.
-
Remove the bolts - arrows - for the stabilizer bar bracket.
-
Remove the nut - arrow - and remove the bolt toward the rear.