Jetta SportWagen L5-2.5L (CBUA) (2009)
Headliner: Service and Repair
Molded Headliner, Sedan
Roof Trim
Molded Headliner, Sedan
Removing
-
If present, open sunroof.
-
Switch off ignition.
-
Remove the center console
‹› Standard Center Console Removing and Installing --> [ Standard Center Console ] See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Standard Center Console
‹› Highline Center Console Removing and Installing --> [ Highline Center Console ] See: Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Highline Center Console
‹› It not necessary to remove the trim panel mount - 1 - when removing the Highline center console.
-
Remove the connection (for the air duct in the center console) - 2 - in - direction of arrow -.
‹› It is not necessary to remove the passenger's or driver's seat.
Vehicles with DSG and automatic transmission
-
Release the selector lever with the emergency release and put it in the "S" position.
With Manual Transmission
-
Engage 4th gear with the selector lever.
‹› Use a cloth or tape on the upper part of the lever to avoid damage to the headliner.
All vehicles
-
Remove lights and switches in headliner.
-
Remove roof end strip.
-
Remove upper A-pillar trim on left and right. Refer to --> [ Upper A-Pillar Trim ] See: Trim Panel/Service and Repair/Pillar and Side Trim.
-
Remove upper B-pillar trim on left and right. Refer to --> [ Upper B-Pillar Trim ] See: Trim Panel/Service and Repair/Pillar and Side Trim.
-
Remove C-pillar trim on left and right. Refer to --> [ C-Pillar Trim, Sedan ] See: Trim Panel/Service and Repair/Pillar and Side Trim.