Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Secure the front side of the side panel trim molding - 2 - with a bolt - 1 -. Tightening torque: 2 ±0.5 Nm.
-
Remove the protective film - 3 - from the double-sided tape on the side panel trim molding - 2 - using a wedge.
-
Secure the side panel trim molding - 2 - by pressing it onto the body.
-
Install the remaining bolts - 1 - (Qty. 3). Tightening specification: 2 ± 0.5 Nm