Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Slide the tilt mechanism - 3 - into guide rail - 1 -.
-
Make sure that the slider - 2 - points toward the rear when sliding the it into the guide rails - 1 -.
-
Slide the cable - 2 - in - direction of arrow B - into the guide rails - 3 -.
-
Insert the cable - 2 - in - the direction of arrow A - into the guide slots - 1 -.
NOTE: The tilt mechanism may not be pulled or pushed on the guide rail.
-
Push the tilting mechanism on both sides all the way forward until it has completely lowered.
-
Press the tilting mechanism only on those guiding slot locations - arrow - - 2 -, and not on the rails - 3 -.
-
Install the rear lid on the assembly frame.
-
Install the sunroof motor.
-
Install the assembly frame on to the vehicle.
-
Install the rear glass sunroof panel.
-
Install the front glass sunroof panel.
-
After completing all the work, perform a panorama sun roof adaptation.