Jetta SportWagen L5-2.5L (CBUA) (2009)
Brake Pad: Service and Repair
Front Brakes
FS III Caliper
Brake Pads
Special tools, testers and auxiliary items required
‹› Torque wrench 5-50 Nm (VAG 1331)
‹› Piston resetting tool (T10145)
Removing
When removing, mark the brake pads if they will be used again. Install them in the same position, otherwise braking effect will be uneven!
-
Remove the wheels.
-
Disconnect the electrical connector - 1 - for the brake pad wear indicator.
-
Remove the caps - arrows -.
-
Loosen both guide pins - arrows - and remove them from the brake caliper.