Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Remove the bolts - 6 - and disconnect electrical connector - 3 -.
-
Remove the bolts - 5 - and set down the coolant expansion tank with connected hoses onto the engine.
-
Remove the bolts - 1 -, - 2 - and - 3 - and remove the engine mount.
The rear bolt in the cylinder block is accessible above the wheel housing liner.
-
Remove the transmission side engine mount bolts - arrows -.
-
Slide the engine as far as possible toward the front and the left.