Jetta SportWagen L5-2.5L (CBUA) (2009)
(V.A.G 1332) must be rearranged for installing ribbed belt pulley with freewheel as follows:
-
Disengage socket - 1 - and pull it off handle part - 2 -.
-
Turn around handle part - 2 - of torque wrench 180° and insert socket again.
-
Set turning direction of torque wrench to left at socket.
-
Insert (V.A.G 1603/1) into generator shaft.
-
Counter hold (VAS 3400) using 17 mm open end wrench.
-
Tighten the free-wheeling ribbed belt pulley by turning the generator input shaft to the left using the (V.A.G 1332).
-
Tighten all fasteners to specified values. Refer to --> [ Generator Tightening Specifications ] See: Specifications/Mechanical
Specifications/Alternator/Generator Tightening Specifications.