Jetta SportWagen L5-2.5L (CBUA) (2009)
Catalytic Converter: Service and Repair
Front Exhaust Pipe with Catalytic Converter Assembly Overview, Engine Codes BGQ and CBUA
Front Exhaust Pipe with Catalytic Converter Assembly Overview, Engine Codes BGP, BTK and CBTA
1
Exhaust manifold
‹› Coat stud bolts with hot bolt paste (G 052 118 A3).
2
Gasket
‹› Always replace.
‹› Note installation position:
Seal recess - arrow A - must be located at exhaust manifold recess - arrow B -.
3
Nut, 25 Nm
‹› Always replace.
4
Front exhaust pipe with catalytic converter
‹› Protect from shocks and impact stress.
‹› With flex joint.
‹› Flex joint must not be bent more than 10 degrees - otherwise it may be damaged.
‹› Removing and installing, refer to --> [ Front Exhaust Pipe with Catalytic Converter ] See: Front Exhaust Pipe with Catalytic Converter.