Jetta SportWagen L5-2.5L (CBUA) (2009)
/Page-1543014.png)
-
Remove lining mats from rear cup holder.
-
Remove two bolts - 1 - and - 2 - (1.5 Nm) respectively.
-
Remove two bolts - 3 - and - 4 - (1.5 Nm) respectively.
-
Remove lining mat from rear beverage holder and remove bolt - 5 - (1.5 Nm).
‹› When installing, bolts must be installed in the sequence - 1 -, - 2 -, - 3 -, - 4 - and - 5 -.
-
Pull center console upward as far as possible.
