volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Headlamp Range Control Positioning Motor|Page 7231 > < Headlamp Range Control Positioning Motor|Page 7229
Page 5
background image

-

Check headlamp for function.

-

Check headlamp adjustment and adjust headlamp if necessary.

Headlamp Range Control Positioning Motor, Hella

Removing

‹› If adjustment motors are removed and installed or replaced, headlamp adjustment must be checked and headlamp must be adjusted if necessary.

‹› Illustrations depict replacement of Headlight beam adjusting motor at right headlamp.

-

Switch off ignition, switch off all electrical consumers and remove ignition key.

-

Remove headlamp. Refer to --> [ Headlamps ] See: Service and Repair/Removal and Replacement/Headlamps. 

-

Rotate cover cap - 1 - in - direction of arrow  - and remove it.

-

Disconnect harness connector - 2 - of headlamp beam adjusting motor - 1 -.

Headlamp Range Control Positioning Motor|Page 7231 > < Headlamp Range Control Positioning Motor|Page 7229