volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Auxiliary Power Outlet|Service and Repair|Page 3854 > < Wiring Harness|Diagrams|Page 3849
Page 1
background image

Auxiliary Power Outlet: Service and Repair

Converter with Socket, 12V, 230V or 12V-115V

CAUTION!
‹› The Converter with Socket, 12V, 230V (U13)/Converter with Socket, 12V-115V (U27) housing contains condensers that can be

charged with residual voltage.

‹› There is a danger of electric shock.

‹› The Converter with Socket, 12V, 230V (U13)/Converter with Socket, 12V-115V (U27) housing must not be opened under any

circumstances.

Special tools, testers and auxiliary items required

‹› Trim removal wedge (3409)

CAUTION!
‹› Turn off the ignition and all electrical consumers.

‹› Remove ignition key.

‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool

(VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

‹› The connections, wires or 230 V socket must not be repaired under any circumstances.

‹› If there is a connection, wire or 230 V socket malfunction, replace the entire unit.

Removal:

-

Open the cover - 1 -.

-

 Using a (VAS 3409), remove the socket cover -  2 -, which is clipped in on both sides of the socket.

-

Remove the two bolts - 3 - (1.5 Nm).

-

Remove the inner outlet unit - 4 -. Both side brackets -  5 - must be loosened to do this.

Auxiliary Power Outlet|Service and Repair|Page 3854 > < Wiring Harness|Diagrams|Page 3849