Jetta SportWagen L5-2.5L (CBUA) (2009)
Power Distribution Module: Service and Repair
Vehicle Electrical System Control Module
‹› If Vehicle Electrical System Control Module (J519) is to be replaced, the work procedure to read out the codes stored in the module must always
be performed. Refer to --> [ Vehicle Electrical System Control Module, Coding ] See: Testing and Inspection/Programming and Relearning.
Removing
The vehicle electrical system control module is removed the same way as the relay carrier on it at the left of the instrument panel. Refer to --> [ Relay
Carrier on Vehicle Electrical System Control Module ] See: Fuse Block/Service and Repair/Relay Carrier on Vehicle Electrical System Control
Module.
Installing
The vehicle electrical system control module is installed the same way as the relay carrier on it at the left side of the instrument panel. Refer to --> [
Relay Carrier on Vehicle Electrical System Control Module ] See: Fuse Block/Service and Repair/Relay Carrier on Vehicle Electrical System Control
Module.