Jetta SportWagen L5-2.5L (CBUA) (2009)
Air Injection Pump: Service and Repair
Secondary Air Injection Pump Motor
Removing
-
Remove the noise insulation..
-
Disconnect electrical connectors - 1 - and - 2 -.
-
Press out the clip - 3 - for the wire guide.
-
Press out the wire clip at the top front bolt.
-
Disconnect the pressure hose - 1 - and intake hose - 2 -. To do so, compress the securing ring.
-
Remove the nuts and remove the Secondary Air Injection (AIR) pump motor upward. When doing this, press the lower bolt (rubber bushing)
slightly in order to get by at the transmission.
Installing
Installation is performed in the reverse order of removal. When doing this note the following:
‹› Make sure that pressure pipe and intake hose lock securely to the AIR pump motor.
Tightening Specifications