Jetta SportWagen L5-2.5L (CBUA) (2009)
/Page-1090005.png)
DANGER!
Make sure that no persons are in the vehicle.
-
Connect vehicle battery..
-
If Airbag Control Module (J234) was replaced, it must be coded. Refer to --> [ Components, Adapting ] See: .
Components, Adapting
Airbags
Components, Adapting
Special tools, testers and auxiliary items required
‹› Vehicle Diagnosis, Testing and Information System (VAS 5051)
‹› Diagnostic cable (VAS 5051/5A) or (VAS 5051/6A)
In Vehicle Diagnosis, Testing and Information System (VAS 5051), select "Guided Fault Finding".
After all control modules have been interrogated:
-
Press the Go to button.
-
Press the display "Function/component selection".
-
Select "body".
-
Select "body repairs".
-
Select "01 - On Board Diagnostic capable systems".
-
Select "airbag".
-
Select "functions".
-
Select "action".
Driver Airbag
Airbags
Driver Airbag
"Advanced Airbag System" (only for USA/Canada)
‹› "Advanced Airbag System" refers to an airbag module with two airbag stages which are deployed depending on the severity of the accident. For
less severe crashes, the second stage is not deployed.
‹› Starting in MY 2009 the Jetta has only the passenger side front airbag is dual stage. The driver side front airbag has only a single stage igniter
CAUTION!
‹› Airbag modules in which only the first stage has been deployed can cause severe injuries by deployment of the second stage.
‹› Observe safety precautions for working on airbags. Refer to --> [ Airbag Safety Precautions ] See: Service Precautions.
At this time, there is no possibility of checking whether the second stage has been deployed definitively. For this reason, such airbag modules must be
returned to original packaging for proper recycling/disposal in accordance with national legislation. Direct questions to your importer!
CAUTION!
Disposal of undeployed airbag units as industrial waste/garbage is not permissible!
‹› Removal and installation of airbag unit is described for multifunction steering wheel.
