Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Disengage securing clip - 2 - using a screwdriver and pull out of master cylinder until it stops.
-
Disconnect hose/line assembly - 1 - from master cylinder and plug it.
All vehicles
-
Disconnect electrical connector - 4 -.
-
Unclip Clutch Position Sensor (G476) on master cylinder - arrow - and remove.
Installing
Installation is in reverse order of removal. Pay attention to the following:
‹› Replace hose clamps.
If the hose/line assembly was removed:
-
Press hose/line assembly - 1 - with O-ring - 2 - into master cylinder connection - 4 - until securing clip - 3 - engages audibly.