volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Front Suspension|Page 4036 > < Front Suspension|Page 4034
Page 3
background image

-

Remove the mounting bolts - 1 - and remove the Left Rear Level Control System Sensor (G76) -  2 -.

Installing

Install in reverse order of removal, noting the following:

-

Tighten all threaded connections using the specified torques. Refer to --> [ Fastener Tightening Specifications ] See: Lighting and
Horns/Specifications.

-

Check the Left Rear Level Control System Sensor (G76). Refer to --> [ Level Control System Sensors, Checking ] See: Testing and Inspection.

-

Perform headlamp basic setting.

‹› If the Left Front Level Control System Sensor (G78)/Left Rear Level Control System Sensor (G76) is replaced, check the values. Refer to --> [

Level Control System Sensors, Checking ] See: Testing and Inspection. Then perform basic setting on the headlamps. 

‹› Headlamp basic setting cannot be performed if the values for the Left Front Level Control System Sensor (G78)/Left Rear Level Control System

Sensor (G76) are outside of the tolerance.

Front Suspension|Page 4036 > < Front Suspension|Page 4034