Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Attach wiring harness - 3 - to bracket - 7 - - arrow B -
-
Place selector lever - 2 - onto selector shaft - 6 -.
Ensure that selector lever pin - 2 - engages in spool valve - 1 - - arrow A -. If necessary, position spool valve accordingly.
-
Set washer - 5 - and nut - 4 - on selector shaft - 6 -.
Centering collar of nut must face washer and run into washer on tightening.
Wiring harness must be routed beneath selector lever.
-
Tighten selector lever nut - 1 - to specified tightening specification: --> [ Tightening Specifications ] See: Specifications/Mechanical
Specifications/09G Transmission (6 Speed A/T)/Tightening Specifications.