Jetta SportWagen L5-2.5L (CBUA) (2009)
Clutch Master Cylinder: Service and Repair
Master Cylinder
Special tools, testers and auxiliary items required
‹› Pliers (T10005)
Removing
-
Remove mounting bracket --> [ Mounting Bracket ] See: Clutch Pedal Assembly/Service and Repair/Mounting Bracket.
-
Disengage master cylinder operating rod mount using pliers (T10005).
-
Place spacer - A - between clutch pedal and stop and press clutch pedal toward spacer.
‹› Length of spacer = approximately 40 mm (e.g. 1/ 2" socket insert)
-
Disengage securing bracket - B - and pull master cylinder out of mounting bracket - arrow 1 - and - arrow 2 -.