Jetta SportWagen L5-2.5L (CBUA) (2009)
In conjunction with this, the differential housing had a circumferential groove - B -.
-
Insert thrust washer union with transmission fluid.
-
Install thrust washer union so that it engages into the groove - B - of the differential housing.
Differential bevel gears and differential bevel gear axle, installing
-
Insert thrust washer union with transmission fluid.
-
Insert both large differential bevel gears and secure (e.g. with flange shaft).
-
Insert small differential planetary gears 180° offset and pivot them into position.
-
Press in differential bevel gear axle - arrow A - up to first small differential bevel gear.
-
Insert threaded pieces - arrows B - in large differential bevel gears
Installation position: Shoulder faces toward differential bevel gear
-
Drive differential planetary gear axle into final position and secure with spring pin.
Installation position of thrust washer for tapered ring - 1 -