Jetta SportWagen L5-2.5L (CBUA) (2009)
‹› Not needed with plastic relay lever
14
Bushing
‹› Not needed with plastic relay lever
15
Relay lever
‹› Installation position --> [ Installation position of transmission shift lever/relay lever ]
‹› Adjust shift mechanism after installation --> [ Shift Mechanism, Adjusting ] See: Shifter M/T/Adjustments
‹› Can be made of plastic or metal
‹› The metal relay lever is placed in the bushings --> [ 14 Bushing ] and secured with a lock washer --> [ (item 13) Lock washer ].
‹› From 05.07 plastic relay lever
‹› Plastic relay lever, removing and installing with cable retainer --> [ Plastic Relay Lever ] See: Shifter M/T/Service and Repair/Removal and
Replacement/Plastic Relay Lever
‹› The bushings and lock washers are not needed with plastic relay lever
16
Slide shoe
17
Transmission shift lever
‹› With balance weight
‹› Insert so that master spline aligns with shift rod
‹› Installation position --> [ Installation position of transmission shift lever/relay lever ]
‹› Adjust shift mechanism after installation --> [ Shift Mechanism, Adjusting ] See: Shifter M/T/Adjustments
‹› From 06.06, smaller diameter on cable retainer mounting bolts --> [ From 06/06, smaller diameter of shift cable retainer mounting bolts ]
18
Self-locking nut, 23 Nm
‹› Always replace
Allocation of cable retainers