Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Press down selector shaft direction of - arrow 1 -.
-
While pressing down selector shaft, rotate bracket - A - upward in direction of - arrow 2 - and simultaneously press it in carefully until it engages
in selector shaft.
-
Boot with shifter knob and noise insulation, removing and installing. --> [ Boot with Shifter Knob and Noise Insulation ] See: Service and
Repair/Removal and Replacement/Boot with Shifter Knob and Noise Insulation
-
If equipped, remove noise insulation.
Set shift lever as follows:
-
Move shift lever to neutral position.
-
Guide connecting pin (T10027 A) through hole - A - and into hole - B -.
-
Now turn locking mechanism on shift cable and selector cable toward the right in direction of - arrow - up to stop.