Jetta SportWagen L5-2.5L (CBUA) (2009)
Shifter M/T: Removal and Replacement
Boot with Shifter Knob and Noise Insulation
Boot with Shifter Knob and Noise Insulation
Removing
-
Pull boot upward out of center console frame or carefully pry out - arrows -.
On some equipment versions, you must pry out boot at front area.
-
Roll boot up over shifter knob.
-
Open clamp - arrow - and remove shifter knob and boot.
In some equipment versions, the center console frame remains in center console.
-
Then the center console frame must be pulled out or carefully pried out - arrow 1 -.