Jetta SportWagen L5-2.5L (CBUA) (2009)
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
‹› Grease (G 000 450 02)
-
First check whether a coded radio is installed. In this case, find out anti-theft coding.
-
Disconnect battery Ground (GND) cable with ignition switched off.
-
Boot with shifter knob and noise insulation, removing and installing. --> [ Boot with Shifter Knob and Noise Insulation ] See: Boot with Shifter
Knob and Noise Insulation
-
Remove center console and angled mounting bracket for center console
-
Remove nuts - arrows - for shift housing.
-
Remove entire air filter housing
-
Remove lock washer - 3 - for shift cable from transmission shift lever - 1 -.
-
Remove shift cable from pins