Jetta SportWagen L5-2.5L (CBUA) (2009)
-
Lay cutting cord - 2 - around the window and also guide inside the second cord end.
Make sure that cutting cord - 2 - is inserted under the window at the corners.
-
Secure second cutting cord end onto spooling tool (V.A.G 1654).
-
Set spooling tool (V.A.G 1654) to " position I".
-
Relocate spooling tool (V.A.G 1654) appropriately and cut window free.
-
While cutting free, press cutting cord against window using a wedge (V.A.G 1474/5) to prevent damage to instrument panel and to have clearance
at window flange.
Installing
Preparing undamaged window for glazing. Refer to --> [ Undamaged Window, Preparing for Glazing ] See: Windows/Service and Repair/Flush
Bonded Windows Overview
Preparing new window for glazing. Refer to --> [ New Window, Preparing for Glazing ] See: Windows/Service and Repair/Flush Bonded Windows
Overview
Preparing window flange for glazing. Refer to --> [ Window Flange, Preparing for Glazing ] See: Windows/Service and Repair/Flush Bonded
Windows Overview
Installation notes. Refer to --> [ Installation Information ] See: Windows/Service and Repair/Flush Bonded Windows Overview
Minimum curing time. Refer to --> [ Minimum Curing Time ] See: Windows/Service and Repair/Flush Bonded Windows Overview