–
| Mix a solution of 25% isopropyl alcohol and 75% water, DO NOT use soap or soapy solution. |
–
| Clean and dry front and rear bumpers. |
–
| Remove remaining soiling using adhesive remover - D 200 000 10-. |
–
| Do not work anti-scratch film under 15°C ambient room temperature. |
–
| Peel film off wax paper, DO NOT touch adhesive. |
–
| Moisten adhesive on film with alcohol/water solution. |
–
| Position film using a soft plastic wedge and remove seeping liquid. |
–
| Check that the film has been positioned correctly. There may be no air bubbles or wrinkles. |
–
| Dry with a clean soft cloth. |
|
|
|