New Beetle
| Removing and installing lid lock |
| 1 - | Carrier for rear lid remote release motor |
| q | With lock cylinder and microswitch as well as retractable handle |
| q | Rear lid remote release motor -V151 - can only be removed together with carrier |
| q | Removing and installing → Chapter |
| 2 - | VW emblem |
| q | Upper part for access to handle and lock cylinder swivels |
| q | Bolted to carrier → Item |
| q | Removing: |
| – | Removing carrier for remote release motor → Chapter |
| 3 - | Water drain hose |
| q | Fitted on drainage connection on carrier → Item |
| 4 - | Rear lid |
| 5 - | Lock |
| q | Removing: |
| – | Removing lid trim → General body repairs, interior; Rep. Gr.70. |
| – | Separate connector from lock |
| – | Unclip operating rod → Item, remove bolts → Item and take lock off lid |
| 6 - | Bolt/screw |
| q | 23 Nm |
| 7 - | Lock plate |
| q | Adjusting - within oversized holes |
| q | Removing: |
| – | Remove load sill trim → General body repairs, interior; Rep. Gr.70 |
| – | Remove bolts → Item |
| 8 - | Bolt/screw |
| q | 23 Nm |
| 9 - | Operating rod |
| 10 - | Combi-bolt |
| q | 5 Nm |
