New Beetle
| Assembly overview |
| 1 - | Right hydraulic cylinder |
| q | Removing → Chapter |
| 2 - | Sliding switch for convertible roof position |
| q | Installed only on right side |
| q | Unclip from hydraulic cylinder -1- |
| 3 - | Hydraulic hoses |
| q | Removing and installing → Chapter |
| 4 - | Convertible roof actuation control unit -J256- |
| q | On right in luggage compartment |
| q | Further information → Current flow diagrams, Electrical fault finding and Fitting locations. |
| 5 - | Left hydraulic cylinder |
| q | Removing → Chapter |
| 6 - | Plugs |
| 7 - | Oil filler screw |
| q | 5 Nm |
| 8 - | Hydraulic pump |
| q | Removing and installing → Chapter |
| 9 - | Tommy screw |
| q | Turning the toggle screw depressurises the hydraulic system, allowing the convertible roof to be operated manually. |
| 10 - | Oil-level indicator |
| q | With the convertible roof open, the hydraulic fluid must be between the min. and max. marking |
| 11 - | Contact right, convertible roof protective cover fitted -F156- or left -F155- |
| q | Qty. 2. |
| 12 - | Button for top operation -E137- |
| q | Fitted in the centre console. |
