volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Installing > < Removing and installing the hydraulic cylinder
Removing
Removing
–  Lower the top.
–  Remove side panel trim → General body repairs, interior; Rep. gr.70
   
–  Undo the tommy screw on the hydraulic pump so that any residual pressure in the system can dissipate, and then tighten it again.
–  Open cap -12- on sliding switch.
–  Lever securing clip -13- out of piston rod -14-.
–  Lever piston rod -14- off ball head using a screwdriver -10-.
–  Close convertible roof manually.
–  Remove bolts -8-.
–  Pull retaining clip -5- out.
–  Remove hydraulic hoses -2- and -4-.

   

Installing > < Removing and installing the hydraulic cylinder