Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing >
< Removing and installing hydraulic hoses
New Beetle
Body
General body repairs, exterior
Convertible top/hard top/canopy
Electrohydraulic roof / moving_and_installing_hydraulic_hoses/">Removing and installing hydraulic hoses
Removing
Removing
Removing
–
Remove luggage compartment trim on left and right sides
→ General body repairs interior; Rep. Gr.70
.
–
Remove luggage compartment side trim panels on left and right
→ General body repairs interior; Rep. Gr.70
.
–
Removing side panel
→ General body repairs, interior; Rep. Gr.70
.
–
Loosen tommy screw
-3-
on hydraulic pump to release any residual pressure in the system.
–
Remove Torx screw
-1-
(7 Nm).
–
Remove hydraulic hoses
-2-
at hydraulic pump.
–
Free hydraulic hoses and unclip from cross panel and side panel.
–
Pull out retaining clip
-1-
and take hydraulic hoses off hydraulic cylinder.
–
Guide hydraulic hoses through water catchment tray.
Body
General body repairs, exterior
Convertible top/hard top/canopy
Electrohydraulic roof / moving_and_installing_hydraulic_hoses/">Removing and installing hydraulic hoses
Removing
Installing >
< Removing and installing hydraulic hoses