volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing rear spoiler drive

New Beetle

Removing
Removing
  Note
The adjustable rear spoiler control unit -J223- and the adjustable rear spoiler motor -V52- are integrated in one component and are designated as rear spoiler drive in this description.
–  Raise rear spoiler “manually” → Chapter.
–  Remove rear lid lower trim → General body repairs, interior; Rep. Gr.70.
  WARNING
Before commencing any work on the electrical system: Disconnect battery earth strap.
   
–  Disconnect connection -arrow- from drive for rear spoiler -4-.
  Note
The wiring harness connections can be unhooked from the bracket on the lower guide tubes -5-.
–  Loosen screw -1- and open hose clip -2- (unhook).
–  Remove bolts/screws -3- and take drive -4- off lower guide tube -5-. Prescribed torque: Bolts -3- = 2.5 Nm
  M66-0008

Installing > < Removing and installing rear spoiler drive