The door hinges on the-pillar must be loosened to ensure a correct adjustment of door. Other measures such as raising the door have no effect. Subsequent pressure from above will cause the door to sack again.
Upper door hinge 05.00
1 -
Door hinge
2 -
Stud
3 -
Nut (20 Nm + 90°)
4 -
Bolt (20 Nm + 90°)
5 -
Bolt (27 Nm)
Upper door hinge 06.00
1 -
Door hinge
2 -
Stud
3 -
Nut (20 Nm + 90°)
4 -
Bolt (20 Nm + 90°)
5 -
Bolt (27 Nm)
Lower door hinge
1 -
Door hinge
2 -
Grub screw (13 Nm)
3 -
Bolt (20 Nm + 90°)
Note
Always renew bolts -4- on upper hinge and -3- on lower hinge each time they are loosened. The threaded stud -2- must be renewed when the corresponding nut -3- on upper hinge is loosened.