New Beetle
| Door handle and door lock - Assembly overview |
| 1 - | Door lock |
| q | The door lock can only be removed in conjunction with the assembly carrier |
| q | Removing and installing → Chapter |
| q | Removing and installing (Cabriolet) → Chapter |
| 2 - | Cable |
| q | Lock release |
| 3 - | Retaining bracket |
| q | Bolted and riveted to door lock |
| q | Not supplied with door lock |
| 4 - | Bearing plate |
| q | Removing and installing → Chapter |
| 5 - | Multi-point socket head bolt |
| q | Socket -T10011- |
| q | 8.5 Nm |
| 6 - | Door handle |
| q | Removing and installing → Chapter |
| 7 - | Cap |
| 8 - | Lock cylinder housing |
| q | Remove → Chapter |
| q | Lock cylinder is not supplied as individual parts |
| 9 - | Base |
| 10 - | Multi-point socket head bolt |
| q | Socket -T10011- |
| q | 4.5 Nm |
| q | Loosening this screw moves the locking device for the lock cylinder housing → Item and the lock cylinder housing can then be pulled out from the bearing bracket → Item |
