| –
| Insert lock cylinder housing -2- (at right angles to door) into door handle bearing bracket. |
| –
| Tighten screw -1- using multi-point socket screwdriver - T10011- (this in turn moves the bearing bracket -3-, the locking device -4- for the lock cylinder housing -arrow-). |
Note | t
| Moving the locking device -4- simultaneously releases the pretensioned and blocked spring arm -5- for the handle (can be heard). |
| t
| Then always check function while door is still open, as an incorrectly fitted and adjusted Bowden cable cannot open the door. |
|
|
|
