New Beetle
|
Caution
| 1 - | Belt height adjustment |
| q | To remove height adjustment mechanism, first remove upper trim on B-pillar. |
| 2 - | Socket head bolt |
| q | 23 Nm |
| 3 - | Belt guide |
| 4 - | Cover for belt guide |
| 5 - | Hexagon bolt |
| q | 40 Nm |
| 6 - | Front seat belt buckle |
| 7 - | Anchorage rail |
| 8 - | Socket head bolt |
| q | 23 Nm |
| 9 - | Hexagon bolt |
| q | 40 Nm |
| 10 - | Washer |
| 11 - | Hexagon bolt |
| q | 40 Nm |
| q | Loosening hexagon head bolt -11- makes the belt tensioner safe, and tightening it returns the belt tensioner to a functional condition (does not apply for electric belt tensioner). |
| 12 - | Seat belt with belt tensioner |
| q | Two different belt tensioners are fitted: electrical belt tensioner in models with side airbags. Mechanical belt tensioner in models without side airbags. |
| q | To remove, first remove side panel trim → Side panel trim; Rep. gr.70. |
| q | Retaining lugs determine position of belt inertia reel. |
| q | Loosening hexagon head bolt -11- makes the belt tensioner safe and tightening it returns the belt tensioner to a functional condition (does not apply for electric belt tensioner). |
| q | The disposal of old components that have not been ignited will be carried out by the distribution centre or the importer |
| 13 - | Connector |
| q | Only with electric belt tensioners |
| 14 - | Cross-head bolts |
| q | 1.5 Nm |
| 15 - | Belt guide |
| q | Secured with 2 cross-head bolts. |
